User guide

Table D–7 (Cont.) Graphics Modes
Escape Sequence Description
ESC [ g n1 n2 v1 ... vn High Resolution Graphics
First parameter v1 is for Mode
Table D–8 Alternate Graphics Mode (AGM)
1
Escape Sequence Description
ESC 3 Pn Graphics Line spacing (AGM)
1
, 180/Pn lines per inch
ESC A Pn Set Text Line spacing (AGM)
1
, 60/Pn lines per inch
ESC J Pn Graphics Variable Line spacing (AGM)
1
180/Pn lines per inch
ESC * Mode n1 n2 v1 ... vn Select Graphics Mode (AGM)
1
60/Pn lines per inch
1
Alternate Graphics Mode is set by Set-up.
Table D–9 Character Set Selection
Escape Sequence Description
ESC 6 Select Character Set 2 (or B)
3
ESC 7 Select Character Set 1 (or A)
2
ESC n1 n2 v1 ... vn Select All Character Set
1
ESC ^ Print Single Character from All Character Set
1
1
All Character Sets charts are given starting from Figure D–1.
2
Character Set 1 (or A) is based on the All Character Set with the exception of the following:
The characters in columns 0, 1, 8, and 9 are not printed.
The control codes as specified in the second column of Table D–2 are applicable.
3
Character Set 2 (or B) is based on the All Character Set with the exception of the following:
The characters in columns 0, and 1 are not printed.
The control codes as specified in the third column of Table D–2 are applicable.
(continued on next page)
IBM Proprinter X24E Quick Reference D–7