User guide

Table D–4 (Cont.) Vertical Form Handling
Escape Sequence Description
ESC N Pn Set Automatic Perforation Skip on fanfold paper
Pn is the number of lines from bottom of paper to
skip
ESC O Cancel Automatic Perforation Skip
ESC [ n1 n2 P1 P2 P3 P4 Set Vertical Units
P1 P2 for Text vertical units value,
P3 P4 for Graphic vertical units value
ESC EM Pn Sheet Feeder Selection
EM = 1/9
Pn = 0/0: Eject single sheet and deselect Sheet
Feeder
Pn = 0/1 or 0/2: Ejects single sheet and select Shhet
Feeder
Table D–5 Horizontal Form Handling and Printing Modes
Escape Sequence Description
ESC : Set Horizontal Spacing to 12 CPI
ESC - Pn Underline Printing
Pn = 0/1 (or any odd number) set Underline Printing,
Pn = 0/0 (or any even number) cancel Underline
Printing
ESC _ Pn Overline Printing
Pn = 0/1 (or any odd number) set Overline Printing,
Pn = 0/0 (or any even number) cancel Overline
Printing
ESC [ @ n1 n2 NUL NUL P1 P2 Double-Wide/Double-High Mode
P1 controls line spacing and character height,
P2 controls character width
ESC D P1 P2 ... Pn NUL Set Horizontal Tabs
ESC E Emphasized Printing
ESC F Cancel Emphasized Printing
ESC G Enter NLQ Printing
ESC H Cancel NLQ Printing
(continued on next page)
D–4 IBM Proprinter X24E Quick Reference