User guide

Table C–8 (Cont.) Character Sets Power-up Settings
Character Set Power-up Setting
G1 US ASCII
G2 and G3 User Preference Character Set
GL G0
GR G2
User Preference Character Set Defined by Set-up feature "DEC 3"
Table C–9 Reports
DA Device
Attributes
CSI c Request Device Attributes Report
DAR Device
Attributes
Report
CSI ? Ps1 ; Ps2
; . . . ; Psn c
(printer to host)
Ps1=72
Ps2–Psn describe extensions. See the
Programming Supplement.
DA2 Secondary
Device
Attributes
CSI>Psc Ps must = 0
DA2R Secondary
Device
Attributes
Report
CSI > Ps1 ; Ps2 c
(printer to host)
Ps1=54
Ps2 = firmware revision x 10
DECFSR Font Status
Report
DCS3"{D...DST
(printer to host)
D . . . D = type_style ( intended_pitch ;
SGR_parameter) ; CR LF . . .
DECRFS Request Font
Status
CSI Ps " { Ps must = 3
DSR Device Status
Request
CSI Ps n Ps = 0 or 5: Request extended DSR
Ps = ?2: Enable brief unsolicited
reports, send extended report
Ps = ?3: Enable/send extended
unsolicited reports
DSR Device Status
Report
Brief: CSI Ps n
Extended: brief,
followed by
CSI Pn1 ; Pn2
; . . . ; Pnn n
Ps = 0: No errors
Ps = 3: Error
See the Programming Supplement for
extended report
C–8 DEC PPL2 Quick Reference