User guide
Physical Page Characteristics of the LA600 MultiPrinter
16.10 Printable Area
If Pn=0, the device enters no forms mode. This mode is accessible via command
sequence only. In this mode the Form Feed button on the Operator Panel is
not processed as a Line Feed. The function of the button is unchanged.
16.11 Logical Page to Physical Sheet Mapping
To control page length for cut-sheet paper, the LA600 MultiPrinter uses the
paper-in sensor. (The printer does not use a page-length setup menu nor the
Set Lines Per Physical Page—DECSLPP—command.)
Simulating page length with cut-sheet paper can be achieved, however, with
the command Set Top and Bottom Margins (DECSTBM). This method is
effective because the bottom margin acts as the end of the page.
16.12 Tabs
The LA600 MultiPrinter supports a maximum of 128 horizontal tabs and a
maximum of 128 vertical tabs.
16–8 Physical Page Characteristics of the LA600 MultiPrinter