User guide

Fonts and Character Attributes on the LA75 Plus Companion Printer
5.1 Built-In Font Repertory
Table 5–1 (Cont.) Supported Character Sets
Character Set
I
2
F Designator
Characters Code
96-Character Sets
ISO Latin-1 Supplemental
1
A 4/1
ISO Latin-2 Supplemental
1
B 4/2
ISO Latin-Greek Supplemental
1
F 4/6
ISO Latin-Hebrew Supplemental
1
H 4/8
ISO Latin-Cyrillic Supplemental
1
L 4/12
ISO Latin-5 Supplemental
1
M 4/13
1
Character sets that can be designated by DECAUPSS
5.2 Additional Character Sets
Additional character sets in a character set cartridge are available for selection
if the cartridge was installed at the time the printer was powered up. These
additional character sets are addressable in the same way as the built-in sets:
• Through setup selection (G0 Character set or User Preference Character
set)
• Through the Select Character Set (SCS) escape sequence or the Assign
User Preference Supplemental Set (DECAUPSS) escape sequence if the
character set selected is a valid choice (see Table 5–1).
The Select Graphic Rendition (SGR) escape sequence is not needed for selecting
fonts when the character sets provided by the cartridge are designed in the
built-in typestyle.
5.3 Cartridge Font Repertory
Cartridge fonts that are available are listed in Table 5–2.
Fonts and Character Attributes on the LA75 Plus Companion Printer 5–3