User guide

Status and Error Reporting for the LA75 Plus Companion Printer
4.1 Device Attributes Report (DAR)
Table 4–1 Generic DAR Replies
Ps Description Comment
1 Color Sent only if a color ribbon is installed
4 Sixels
5 Katakana extension
6 Sheet feeder Sent only if the sheet feeder is installed
7 Dynamically Reloadable
Character Sets (DRCS), also
known as ‘‘download extension’’
Sent only if downline load capability is
enabled by the setup facility
12 Hebrew extension
23 Metric line spacing extension
24 Greek extension
26 Turkish extension
When the Printer ID setup feature is set to LA50, LA120, or LA210, an alias
DAR response is returned. The alias DAR responses are shown in Table 4–2.
Parameters are separated by a semicolon (;).
Table 4–2 Alias DAR Replies
Ps1
Additional
Parameter Printer ID Selection
?2 LA120
?10 3 LA210
?17 LA50
4.2 Secondary Device Attributes Report (DA2R)
The Secondary Device Attributes Report (DA2R) sent by the LA75 Plus
Companion Printer uses the value 54 for parameter Ps1. This value identifies
the printer model as the LA75 Plus Companion Printer. Parameter Ps2
provides the firmware version. There are no additional parameters.
4–2 Status and Error Reporting for the LA75 Plus Companion Printer