User guide

Initial State Values for the LA75 Plus Companion Printer
3.1 Initial States
Table 3–1 (Cont.) Initial State Values
Variable or
Control Function DECSCL Power-Up
DECSTR
RIS
Recall
Factory
Defaults
(Setup)
Horizontal Tabs
1
Every eight Every eight Every eight Every eight
Line Feed/New Line Reset NVM NVM Reset
CR/New Line Mode Reset NVM NVM Reset
SGR Attributes Disabled Disabled Disabled Disabled
DECGCI — All color
numbers (Pc)
Black Black Black Black
Density control
(SW or forced)
Unchanged NVM Unchanged SW control
Density
(SW control)
Draft Draft Draft Draft
Unidirectional Print
Mode
Reset Reset Reset Reset
Vertical Tabs
2
Every line Every line Every line Every line
G0 Character Set ASCII NVM NVM ASCII
G1 Character Set ASCII ASCII ASCII ASCII
G2 Character Set User Pref. User Pref. User Pref. User Pref.
G3 Character Set User Pref. User Pref. User Pref. User Pref.
GL Character Set G0 G0 G0 G0
GR Character Set G2 G2 G2 G2
Autowrap Mode Set NVM NVM Set
User Preference Set DEC Supp. NVM Unchanged DEC Supp.
Unsolicited Status
Reports
Disabled Disabled Unchanged Disabled
Initialization Message Unchanged NVM Unchanged Disabled
Downloaded Fonts Deleted None Unchanged None
1
Horizontal tabs are set every eight columns, starting with column 9 (9,17, . . . ). All entries in the
tab table are initialized. It is incorrect to initialize only those entries that are addressable on the
currently selected paper size.
2
Vertical tabs are set every line or Vertical Advance Increment (VAI). All entries in the tab table
are initialized. It is incorrect to initialize only those entries that are addressable on the currently
selected paper size.
(continued on next page)
3–2 Initial State Values for the LA75 Plus Companion Printer