User guide

3
Initial State Values for the LA75 Plus
Companion Printer
This chapter lists the values used by the LA75 Plus Companion Printer for:
• A power-up reset or a recall of factory default values
• The Select Conformance Level (DECSCL) command
• The Soft Terminal Reset (DECSTR) or Reset to Initial State (RIS)
commands
3.1 Initial States
Table 3–1 lists the initial state values used by the LA75 Plus Companion
Printer. The printer always powers up in Ready mode if no error is detected.
Table 3–1 Initial State Values
Variable or
Control Function DECSCL Power-Up
DECSTR
RIS
Recall
Factory
Defaults
(Setup)
Protocol Unchanged NVM
3
Unchanged Port
dependent
Origin (DECHPWA) Unchanged 0 Unchanged 0
Vertical pitch 6 line/in NVM NVM 6 line/in
Horizontal pitch 10 char/in NVM NVM 10 char/in
Active position Origin Origin Origin Origin
4
3
NVM indicates that the initial state value is stored in nonvolatile memory.
4
Device performs conditional Form Feed on exit from setup.
(continued on next page)
Initial State Values for the LA75 Plus Companion Printer 3–1