User guide

DECPEC — Paper Exit Control
DECPEC — Paper Exit Control
Selects the paper exit path for cut sheets.
Source: Symbiont Destination: Level 2 Exception
Format
CSI Ps - t
9/11 *** 2/13 7/4
Description
The selective parameters are as follows:
Ps Meaning
0 Paper exits stacker
1 Paper exits stacker
2 Paper exits front side (confirmed by user)
3 Paper exits front side (not confirmed by user)
This command applies to cut sheets only. Paper source is selected by the
DECASFC command.
When confirmation by user is selected (Ps= 2), the printer stops operations
after each page is printed and ejected through the front exit. Printing is
resumed when the confirmation is provided by the user through a dedicated
key on the device front panel.
When confirmation by the user is not selected (Ps= 3), the printer does not stop
printing after each page is printed and ejected through the front exit. Thus,
the application software shall control whether a next page can be printed after
each page is printed and ejected.
DEC PPL2 Command Dictionary Supplement C–5