User guide

Initial State Values for the LA600 MultiPrinter
17.1 Initial States
Table 17–1 (Cont.) Initial State Values for LA600
Variable or
Control Function DECSCL Power-Up
DECSTR
RIS
Recall
Factory
Defaults
(Setup)
Vertical tabs Reset Reset Reset Reset
Active position Origin
2
Origin Origin Origin
2
Horizontal tabs
3
Every eight Every eight Every eight Every eight
Line Feed/New Line Reset NVM NVM Reset
CR/New Line Mode Reset NVM NVM Reset
SGR attributes Disabled Disabled Disabled Disabled
SGR fonts Courier NVM NVM Courier
GSM 100% 100% 100% 100%
Density (DECDEN) Draft NVM
6
NVM
6
Draft
Bar Coding (DECBAR) Reset Reset Reset Reset
Bar Code Attributes
(DECSBCA)
Code 39—
Default
Code 39—
Default
Code 39—
Default
Code 39—
Default
DECGCI—All color
numbers (Pc)
Black Black Black Black
Unidirectional Print
Mode
Reset Reset Reset Reset
Vertical tabs
4
Every line Every line Every line Every line
G0 character set ASCII NVM NVM ASCII
G1 character set ASCII ASCII ASCII ASCII
G2 character set User Pref. User Pref. User Pref. User Pref.
G3 character set User Pref. User Pref. User Pref. User Pref.
GL character set G0 G0 G0 G0
2
Device performs conditional form feed on exit from setup.
3
Horizontal tabs are set every eight columns, starting with column 9 (9,17, . . .). All entries in
the tab table are initialized. Initializing only those entries that are addressable on the currently
selected paper size is incorrect.
4
Vertical tabs are set every line or Vertical Advance Increment (VAI). All entries in the tab table
are initialized. Initializing only those entries that are addressable on the currently selected paper
size is incorrect.
6
Print density at power-up is determined by two set-up features: the "FONT" feature provides a
selection between Draft and any other type style that is available in the NLQ or LQ print densities;
the "PRINT QUALITY" feature provides a selection between NLQ and LQ, on if "FONT" is not set
to Draft.
(continued on next page)
17–2 Initial State Values for the LA600 MultiPrinter