Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-9
LA600 Field Service Manual
Part: CU-40 LA600 Assy DEC P/N: 29-31792-01. A01
Part No: 5112 292 62991
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Remove DEV-40 LA600 Assy (see Part: DEV-40 LA600 Assy)
⇒ Remove if plugged in memory card (A)
⇒ Remove the Personality Module after loosing the two
lockscrews (B)
⇒ Disconnect plug (C) from CU-40 LA600 Assy and
remove CU-40 LA600 Assy
⇒ Remove the EEPROM CU-40-00 (D) and plug it
into the new CU-40 LA600 assy.
Note: Pay attention, that EEPROM (D) is stuffed correct
position (pin marker (E))
Reassembly
Execute the REMOVAL procedure in reverse sequence
Note: Start the function ’Print Out’ and check ’Current Settings’
Page 3-10 Digital Equipment Corporation