Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-7
LA600 Field Service Manual
Part: DEV-40 LA600 Assy DEC P/N: 29-31791-01 A01
Part No: 5112 292 62921
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
⇒ Loosen the two screws (A) and remove screw (B)
⇒ Remove the DEV-40 LA600 Assy
a) while removing, DEV-40 LA600 assy (K) is automatically
disconnected from CU-40 LA600 assy (C)
b) disconnect all plug connections from the DEV-board:
- plug (D)
- plug (E)
- plug (F)
Reassembly
Execute the REMOVAL procedure in reverse sequence
Attention: Wire (L) has to be fastened by screw (B) as shown in Detail Z
Page 3-8 Digital Equipment Corporation