Service manual

LA600 Field Service Manual
Figure 1
Figure 2 Value of PAPER-IN ADJ.:
Digital Equipment Corporation Page 3-5
LA600 Field Service Manual
Part: PSU-40A Assy DEC P/N: FD-W02BY-01
Part No: 5112 292 38110
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Loosen the two screws (A) securing the PSU-40A assy
⇒ Lift the complete Power Supply Unit (PSU), using a screwdriver
⇒ Disconnect plug (C)
⇒ Remove clamp (D) and disconnect plug (B)
REASSEMBLING
Execute the REMOVAL procedure in reverse sequence
ATTENTION:
Do not touch the PSU board within min. 2 minutes after power OFF
Before exchanging the PSU, please check the fuse (F)
Page 3-6 Digital Equipment Corporation