Service manual

LA600 Field Service Manual
1
2
Digital Equipment Corporation Page 4-3
LA600 Field Service Manual
To install the Platen Assy (2)
Ensure that the printer is switched OFF.
⇒ Place platen (2) in the vacant space between print head and metal
bar.
⇒ Move print head from its right hand position into the centre.
⇒ Fit the gear wheel end of the platen into the right hand side
mounting. Be careful not to damage the gear wheel.
⇒ Ensure that the plastic platen clamp (1) is in the upright
position, push the platen into its mounting and lock in position
by pushing the tag on the clamp to the rear.
Install the ribbon cassette.
Fit and close the top cover.
Fit the output stacker.
PM AGC: (s. Installation and User Guide, Chapter 3)
Run the MENU-function AGC ADJUST with ink ribbon cassette installed
but no paper inserted
Page 4-4 Digital Equipment Corporation