Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-63
LA600 Field Service Manual
Part: Kit Torsion Spring D-Axis DEC P/N: 29-31803-01. A01
Part No: 5112 292 41070
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
⇒ Remove lever (A) from D-axis (the plastic snap-in will be
destroyed)
⇒ Remove the torsion spring (B)
REASSEMBLING
⇒ a) Insert the new spring and grease the hole in the engine plate and the
surface of the spring gliding on the plate
b) Insert the lever (A) delivered with the spring until the snap-in
c) Complete the removal procedure in the reverse sequence
Page 3-64 Digital Equipment Corporation