Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-59
LA600 Field Service Manual
Part: Kit Belt Tension 40A DEC P/N: FD-W02M5-01
Part No: 5112 292 38480
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Remove the print head
⇒ a) Disengage the drive belt (A) from the drive wheel horizontal
motor by pressing the belt tension elements on pos. (B)
b) Slide the drive belt out of the drive wheel
c) Remove the drive belt roller bearing (C) from its mounting
bracket
d) Remove the screw (D) and disengage the wedge (E) from the
print head carriage
REASSEMBLING
Execute the REMOVAL procedure in reverse sequence
Page 3-60 Digital Equipment Corporation