Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-55
LA600 Field Service Manual
Part: Kit Cont. Form Exit 40A DEC P/N: FD-W02M7-01
Part No: 5112 292 38460
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Remove DEV-40 Assy (see Part: DEV-40 LA600 Assy)
Remove stacker elements Assy (see Part: Stacker Elements 40B
Assy)
⇒ a) Locate the gearwheel (B), remove the circlip (C) and the
washer (D), remove gearwheel (B) and bearing (A) from
the wheel shaft
b) Remove circlip (E) from the wheel shaft and move it to the
left. Remove the shaft
c) Prepare the left hand side bearing of the pressure roll (H),
such that it can be removed
d) Remove the pressure roll the Assy. out
REASSEMBLING
Execute the REMOVAL procedure in reverse sequence
Page 3-56 Digital Equipment Corporation