Service manual

LA600 Field Service Manual

Digital Equipment Corporation Page 3-51

LA600 Field Service Manual

Part: Kit Vertical Transport 40A DEC P/N: FD-W02M6-01

Part No: 5112 292 38450

Part: Minipitch Belt Stepper DEC P/N: FD-W032Y-01

Part No: 5112 200 08780

Part: Minipitch Belt Form Feed DEC P/N: FD-W0330-01

Part No: 5112 200 08790

REMOVAL

Disconnect mains cable

Remove all encasing parts (see Part: Housing)

Remove DEV-40 Assy (see Part: DEV-40 LA600 Assy)

⇒ a) Locate the right side of the form feed shaft for exchanging

b) Remove both minipitch belts (B)

c) Pull the belt pulley (C) from the wheel shaft for exchanging

d) If the upper form feed shaft has to be exchanged remove

the bearing (E)

e) Remove circlip (F) and bearing (G) on the left side from the

wheel shaft for exchanging

f) Removing the bearings causes the wheel shaft to fall down

into the larger holes, for removal slide the wheel shaft to the

left side

REASSEMBLING

Execute the REMOVAL procedure in reverse sequence

Page 3-52 Digital Equipment Corporation