Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-39
LA600 Field Service Manual
Part: Tractor Gear 40A DEC P/N: FD-W045N-01
Part No: 5112 292 38030
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Remove DEV-40 Assy (see Part: DEV-40 LA600 Assy)
⇒ a) The paper path for output must be set to tractor. By moving
the carriage to the uppermost right position the paper path
will be changed (an audible "click")
b) The axle (A) must be turned to the position as shown in
detail by turning on the minipitch belt (C) in clockwise
direction
c) Remove all cables from the cable guide
d) Remove the three screws (E) and remove the tractor gear
40A Assy
REASSEMBLING
Execute the REMOVAL procedure in reverse sequence
Note: - Before the new assy. can be mounted, turn the gearwheel (F)
in such a way that the bold (G) reaches the uppermost
position
- Observe that the cable installation is correct (Detail Y)
Page 3-40 Digital Equipment Corporation