Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-31
LA600 Field Service Manual
Part: Ribbon Gear 40B Assy DEC P/N: FD-W045W-01
Part No: 5112 292 63840
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
Remove DEV-40 Assy (see Part: DEV-40 LA600 Assy)
⇒ Locate the Ribbon Gear 40B Assy (A)
⇒ a) Loosen the cable (F) from the cable guide
b) Loosen the spring (B), remove lever (C) from (D)
c) Disconnect the 2 pin motor cable from the motor
connector (F)
d) Push the lock tab (E) and remove the Ribbon Gear 40B Assy
REASSEMBLING
Execute the REMOVAL procedure in reverse sequence
Note: Pay attention that the cable installation is correct (Detail Y)
Page 3-32 Digital Equipment Corporation