Service manual

LA600 Field Service Manual
Digital Equipment Corporation Page 3-19
LA600 Field Service Manual
Part: Encoder Strip Assy DEC P/N: FD-W0417-01
Part No: 5112 292 37970
REMOVAL
Disconnect mains cable
Remove all encasing parts (see Part: Housing)
⇒ Remove the two screws (A) (Detail Y)
⇒ Remove the encoder strip 40A Assy (B)
REASSEMBLING
a) Move the carriage to the centre position
b) Execute the REMOVAL procedure in reverse sequence
Caution: Pay attention, that the Encoder Strip Assy is mounted in the
correct position by (Detail Z) and observe that the strip is
slipping under the first two steel noses visible from the
front side of the printer.
Page 3-20 Digital Equipment Corporation