Service manual

Belt Stepper

Belt Form Feed

Kit V-Transport XXX

DEC Field Service Instruction

7-48 7-49

Part: Kit V-Transport Part No.: 5112 292 3845x

DEC P/N.. FD-W02M6-01

Part: Belt Stepper Part No.: 5112 200 0878x

DEC P/N.: FD-W032Y-01

Part: Belt Form Feed Part No.: 5112 200 0879x

DEC P/N.: FD-W0330-01

REMOVAL

" Disconnect mains cable

" Remove all encasing parts (see Part: Housing)

" Remove DEV-40 (see Part: DEV-40)

Y M Locate the right side of the form feed shaft for exchanging

Y M Remove both minipitch belts (1)

Y M Pull the belt pulley (2) from the wheel shaft for exchanging

Y M If the upper form feed shaft has to be exchanged remove the

bearing (3)

Y M Remove circlip (4) and bearing (5) on the left side from the wheel

shaft for exchanging

Y M Removing the bearings causes the wheel shaft to fall down into the

larger holes, for removal slide the wheel shaft to the left side

REASSEMBLING

" Execute the REMOVAL procedure in reverse sequence

5112 991 10732