Service manual

1
2
3
4
4
Spring
Detail B
5
1
Detail A
Horizontal Motor Cable
Stepping Motor 1.8 DEG Cable
Stepping Motor
7.5 DEG Cable
Ribbon Gear Cable
DEC Field Service Instruction
7-40 7-41
Part: Tractor Gear Part No.: 5112 292 3803x
DEC P/N.: FD-W045N-01
REMOVAL
" Disconnect mains cable
" Remove all encasing parts (see Part: Housing)
" Remove DEV-40 (see Part: DEV-40)
Y M The paper path for output must be set to tractor. By moving the
carriage to the uppermost right position the paper path will be
changed (an audible "click")
Y M The axle (1) must be turned to the position as shown in Detail B by
turning on the minipitch belt (2) in clockwise direction
Y M Remove all cables from the cable guide
Y M Remove the three screws (3) and remove the Tractor Gear
REASSEMBLING
" Execute the REMOVAL procedure in reverse sequence
Note: - Before the new can be mounted, turn the gearwheel (4) in
such a way that the bold (5) reaches the uppermost position
- Observe that the cable installation is correct (Detail A)
5112 991 10603