Service manual

1
2
2
3
4
5
6
Detail A
Detail B
DEC Field Service Instruction 5112 991 10565
7-34 7-35
Part: Ribbon Gear Part No.: 5112 292 6384x
DEC P/N.: FD-W045M-01
REMOVAL
" Disconnect mains cable
" Remove all encasing parts (see Part: Housing)
" Remove DEV-40 (see Part: DEV-40)
Y M Locate the Ribbon Gear (1)
Y M Loosen the cable (2) from the cable guide (3)
Y M Loosen the spring (4) and remove lever (5)
Y M Disconnect the 2 pin motor cable (2) from the motor connector
Y M Push the lock tab (6) and remove the Ribbon Gear
REASSEMBLING
" Execute the REMOVAL procedure in reverse sequence
Note: Pay attention that the cable installation is correct (Detail B)