Service manual

Left hand side
7
1
1
2
Right hand
side
5
5
3
4
6
Left hand side
8
10
10
9
11
12
13
DEC Field Service Instruction 5112 991 10514
7-30 7-31
Part: Carriage Part No.: 5112 292 4094x
DEC P/N.: FD-W04JL-01
REMOVAL
" Disconnect mains cable
" Remove all encasing parts (see Part: Housing)
" Remove DEV-40 (see Part: DEV-40)
" Remove the encoder strip (see Part Encoder Strip)
" Remove operator panel, but leave the interface cable connected (see Part:
Operator Panel)
" Remove the cable print head from the print head carriage (see Part: Cable
Print Head)
" Remove the horizontal motor (see Part H-Motor)DEV-40)
" Remove the tractor gear (see Part Tractor Gear)
Y M Remove the two screws (1) and the upper rail (2)
Y M Pull the lever (3) from the lock pin and remove the lever
Y M Release springs (4), (5), and remove lever (6) including spring (4)
Y M Remove the screws (7) and (8). Push the shaft (9) including the
plastic segment (10) out towards the right hand side of the chassis
Note: The plastic segment (10) can not be removed
Y M Slide the carriage (11) out of the guide rail
REASSEMBLING
" Execute the REMOVAL procedure
in reverse sequence
Note: Engage the plastic segment in that way, that the guide rail (10) with
the marker (11) aligns with the marker (12) on the AGC gear (13)