User guide

Installing the Printer
1.3 A First Look at the Printer
1.3.3.1 Removing and Replacing a Ribbon Cartridge
To remove an old ribbon cartridge:
1. Set the power switch to OFF (0).
2. Open the front cover of the printer. Raise the front cover, and tip it back as
far as you can (see Figure 1–6).
3. If the printhead carriage is not centered, you can move the carriage to the
center by hand.
4. Set the printhead adjustment lever to the position marked with the ribbon
icon.
5. Push the ribbon cartridge notches inward, and remove the ribbon cartridge
by pulling it upwards. Discard the old cartridge.
6. To install a new ribbon cartridge, follow the instructions in Section 1.3.3.
1–10 Installing the Printer