User guide

IBM Proprinter III Quick Reference
Table I–3 (Cont.) Terminal Management
Escape Sequence Description
ESC % @ Return to DEC PPL2 mode
ESC @ Reset Printer
ESC Q 1/6 Deselect Printer
ESC [ ! p Reset Printer to DEC PPL2 mode
ESC [ K n1 n2 init id P1 P2 Set Initial Condition. id = 1/6
ESC [ T n1 n2 NUL NUL P1 P2 Code Page Switching. P1 P2 for Code Page number, most
significant byte first. The requested Code Page number is
searched in the resident character sets and in the installed
optional cartridge.
Table I–4 Vertical Form Handling
Escape Sequence Description
ESC 0 1/8-Inch Line spacing
ESC 1 7/72-Inch Line spacing
ESC 2 Start Text Line spacing defined by ESC A
ESC 4
Set Top of Form at current vertical position
ESC 5 Pn Automatic Line Feed
Pn = 0/1: set automatic line feed on CR ,
Pn = 0/0: cancel automatic line feed on CR
ESC A Pn
Set Text Line spacing at 72/Pn lines per inch.
Maximum value for Pn is 255.
ESC B P1 P2 ... Pn NUL Set Vertical Tabs Stops.
Tab stops are given in ascending order.
ESC R or ESC B NUL clears vertical tab stops.
ESC C Pn Set Form Length in Lines
ESC C NUL Pn Set Form Length in Inches
ESC N Pn Set Automatic Perforation Skip
Pn is the number of lines from bottom of paper to skip
ESC O Cancel Automatic Perforation Skip
IBM Proprinter III Quick Reference I–3