User guide

DEC PPL2 Quick Reference
Table H–8 Character Sets Power-up Settings
Character Set Power-up Setting
G0 CHAR SET Defined by Set-up feature G0 CHAR SET
G1 ASCII
G2 and G3 User Preference Character Set
GL G0
GR G2
User Preference Supplemental Defined by Set-up feature USER PREF SET
Table H–9 Reports
DA Device
Attributes
CSI c Request Device Attributes Report
DAR Device
Attributes
Report
ESC [ ? Ps1 ; Ps2
; . . . ; Psn c
(printer to host)
Ps1=72
Ps2–Psn describe extensions. See the
Programming Supplement.
DA2 Secondary
Device
Attributes
CSI > Ps c Ps must = 0
DA2R Secondary
Device
Attributes
Report
ESC [ > Ps1 ; Ps2 ; 0
; Ps4 ; Ps5 c
(printer to host)
Ps1=59
Ps2 = firmware revision x 10
Ps4 = 20 (IBM and EPSON emulations)
Ps5 = firmware edit revision
DECFSR Font Status
Report
ESCP3"{D...D
ST
(printer to host)
D . . . D = type_style (intended_pitch ;
SGR_parameter) ; CR LF . . .
DECRFS Request Font
Status
CSI Ps " { Psmust=0or3
DSR Device Status
Request
CSI Ps n Ps = 0 or 5: Request extended DSR
Ps = ?1: Disable all unsolicited reports
Ps = ?2: Enable brief unsolicited
reports, send extended report
Ps = ?3: Enable/send extended
unsolicited reports
(continued on next page)
H–8 DEC PPL2 Quick Reference