Specifications

6-4
6.2 Printhead
Remove and replace the printhead as follows.
WARNING
If the printer was recently used, the printhead may be hot. Be careful when
handling the printhead.
1. Open the top cover.
2. Shift the carriage to the center of the platen.
3. Remove the ribbon cartridge.
4. Remove the screws (A).
5. Unplug the head connector.
To install a printhead, reverse steps 1 to 5.
Note:Execute the adjustment DISTANCE PRINTHEAD - PLATEN as describe on the
next page.
Figure 6.1 Removing the printhead