Specifications

LA 310 - Service Manual
5-7
6. Replace the Main Board.
7. Replace the Mechanical Assembly.
Paper is not positioned at perforation for tear-off feature.
1. Make sure the printer is in the PAUSE state. If the READY indicator is on press the
READY button.
2. If the platen has been moved by hand, reload the paper. Make sure you use a
complete form for the first sheet.
3. Select the correct form length using the setup feature.
4. Make sure that the rear paper cover is in the raised position.
5. Replace the Main Board.
Printhead carriage does not move smoothly.
1. Examine the paper pathway. Remove any obstructions.
2. Examine the printhead carriage bar (the round bar on which the printhead moves).
Is it dirty? If so, clean it with a soft cloth.
3. Examine the carriage area for obstructions. Remove as necessary.
4. Replace the Main Board.
5. Replace the Mechanical Assembly.
Carriage does not move.
1. Examine the paper pathway. Remove any obstructions.
2. Replace the Main Board.
3. Replace the Mechanical Assembly.