Specifications

4-6
Each of the following tests shall not overlap the bottom of the form. When needed, the
printer shall perform a form feed with the Last line printing and First line printing tests.
Unless specified, all printed text shall be printed at 10 CPI, 6 LPI, Draft density, normal
print mode.
This test shall exibit the following test items:
1. First line printing test: the first line of the form is printed with:
a. the underlined letter "E" from column 1 to 5
b. the underlined Space is printed from column 6 to 75 (or 131)
c. the underlined letter "E" from column 76 to 80 (or 132 to 136)
2. Title: LA 310 MultiPrinter Service Test
3. Configuration information (one line per item ):
a. Paper feeding mode: Tractor Feeding, Friction Feeding.
b. Firmware code version and edit number
c. Type of cartridge installed
d. Form length
e. Paper width
f. Backward Motion features enabled or disabled.
4. The H-pattern alignment test pattern (with no adjustment capability)
5. The printhead test with one numbered output per individual pin.
6. Paper movement test: this test prints two dashed lines ( 2.2 ± 0.1 mm apart ), then
after all other steps of the current form, prints a solid continuous line. This line
must be centered between the first two lines.
In Friction mode and/or if the BACK/MOTION feature is disabled, this test is not
performed.
7. PLU/PLD test ( one line )
8. Printing self test normal mode ( 3 lines )
9. Printing self test Quiet mode ( 3 lines )
10. HSD Printing self test ( 1 line )
11. NLQ Printing self test ( 1 line )
12. NLQ 2 Printing self test ( 1 line )