Specifications

LA 310 - Service Manual
3-9
All indicators (except the Fault indicator) flash simultaneously.
5. Use ← or → to move the cursor between the EPSON FX-1050 or CARTRIDGE
setting.
6. Press ↓ to select the setting you require.
7. Use → to move to the MAIN SET-UP option, and press ↓ to move back to the Main
Set-up menu.
OR
Press the Set-up key to exit this set-up and save the new setting.
3.1.7 Error Conditions in Set-up Mode
When the printer detects that there is no paper, or that the printer cover is open, the
following applies:
1. Paper Out condition in Set-up mode:
- In cut sheet mode, the FF switch is active to load a sheet and resume
set-up automatically.
- In tractor mode,as soon as paper is detected in the left tractor, the FF switch
is active to load paper and resume set-up automatically.
2. Cover Open condition in Set-up mode:
- When the cover is closed after a Cover Open condition, all indicators remain
off with the exception of the Ready indicator wich blinks. Only the Ready
switch is active.
- When you press the Ready switch, Set-up mode is resumed by re-entering
the submenu that was selected prior to the Cover Open condition.