Specifications

LA 310 - Service Manual
3-3
3.1.1 Entering Set-up Mode
Digital recommends that you enter Set-up mode in tractor-feeding mode, and not cut
sheet mode.
NOTE: You must not run Set-up mode with the Pull Tractor option installed.
To enter Set-up mode:
1. Press and hold the Set-up switch while setting the power switch to ON (1).
If you have put paper in the parking position and use tractor feeding, paper is
loaded automatically.
The printer automatically prints the first part of the Set-up directory:
PRINT is the initial default entry.
NOTE: If an option cartridge is installed, the type of cartridge is displayed before
you enter the Set-up directory, with information about the contents of the
cartridge.