Specifications

2-12
The following table illustrates the relation-ship between the lever position and the
number of copies.
LEVER NUMBER OF COPIES THICKNESS max. (mm)
POSITION
0 Needle wear recovery 0.125
- Original copy 0.125
- Original + 1 copy 0.200
3 Original + 2 copies 0.280
- Original + 3 copies 0.360
- Original + 4 copies 0.360
(Pull tractor MUST be used)
6 Non print position
X Ribbon cartridge
replacement position
The lever should be set in position 0 only when it is necessary to recover the
correct print head - platen distance due to needle wear (after extensive and
continuous printer use).
In this case, position 0 will be equivalent position 1.