Specifications

2-4
Fig 2.3 Installing the Cartridge
9. Do not connect the data cable to the host system.
10. Run the print test. The print test is activated from a printer OFF condition, once you
have loaded a sheet of paper, switch the printer off. Then,holding down the QUIET
key on the operator console, switch the printer on again. Hold the QUIET key down
until the mechanical reset has been completed and printing has started, then
release it. To interrupt the print test temporarily, open the cover. Closing the cover
then pressing the READY key will cause printing to resume. That print test can also
be initiated with the cover open, by pressing the PRINT TEST key on the internal
console, printing starts when the cover is closed. To terminate the execution of the
printing test, switch off the printer. Check the print quality ensuring that all the
characters are complete and clearly printed.
11. Connect the printer to the Computer System.