Specifications

LA 310 - Service Manual
2-3
6. Make sure that the label on the back of the printer quotes the same voltage as that
available from the wall socket.
7. Connect the power cable first to the printer and then to the wall socket.
DO NOT SWITCH ON
8. Unwrap the ribbon cartridge, removing the plastic strip which blocks the ribbon. If
necessary, adjust the ribbon tension, by turning the knob on the upper side of the
cartridge in the direction indicated by the arrow.
Fig. 2.2 Preparing the Cartridge
Open the front cover,raising it and tipping it back as far as it will go. Position the
ribbon cartridge on the print head carriage and press it downwards. Make sure the
ribbon feeds correctly between the print head and the metal anti-smudge plate on the
plastic guide.