Specifications

2-2
2.2 Installation
Note:
You should refer to the LA 310 Printer Installation and User's Guide to get more detailed
information for the installation of the printer and loading of paper.
1. Unpack the LA 310 and inspect the contents for missing items or damage.
The contents are: the printer, user documentation, ribbon cartridge, power cord and
serial interface cable. Any damage or shortage should be reported.
2. Locate the LA 310 where it is to be used.
3. Remove the adhesive film from the transparent covers on the front of the printer.
4. Open the front cover (see Figure 2-1), raise it, and tip it back towards the rear of the
printer.
5. Remove the strips of cardboard blocking the printer head and the bail bar (see Figure
2-1).
Fig. 2.1 Removing the Cardboard Strips