Specifications

LA 310 - Service Manual
2-1
2
INSTALLATION
2.1 Preparation
2.1.1 Precautions and Suggestions
For correct functioning of the printer, the following precautions should be taken:
- Do not install the printer near to sources of heat or exposed to direct sun light.
- Leave a free area around the printer to allow sufficient ventilation for the printer
electronics.
- Do not connect the printer to power supplies used for other industrial equipment,
additionally it is essential that the printer is connected to a mains socket with a
protective ground connection.
- Functioning of the printer in a residential area may cause interference to radio-TV
equipment in the immediate vicinity. The user should try to avoid such interference
by relocating the printer and, whenever possible, connecting it to a dedicated power
socket.
- To avoid the possibility of electric shock, damage to the mechanical or electrical parts
or voiding the guarantee, any internal modification to the printer must only be carried
out by qualified service technicians.
2.1.2 Unpackaging and Preliminary Operations
- In addition to the base printer, the packaging also contains Serial Interface Cable,
Power Cord, Ribbon Cartridge and the Operating Manual. The Pull Tractor device is
optional and, if ordered, is sent in separate packaging. Before unpacking, check that
the indications on the bar code labels coincide with the customers order.
- The bar code label contains the part number, revision and serial number.