User`s guide

The BIOS Setup Program
3–10
Integrated Peripherals (Peripherals submenu)
Move the highlighted cell to this field and press <Enter> to launch the submenu. The
following settings are available in the Integrated Peripherals Menu.
Field Settings Description
Serial Port
• Auto*
• Disabled
• COM 1 (3F8h - IRQ4)
• COM 2 (2F8h - IRQ3)
• COM 3 (3E8h - IRQ4)
• COM 4 (2E8h - IRQ3)
Enables, configures or disables
the serial port.
Set the serial port to disable in
order to increase the battery run
time.
Fast Infrared
• Auto
• Disabled*
• COM 1 (3F8h - IRQ4)
• COM 2 (2F8h - IRQ3)
• COM 3 (3E8h - IRQ4)
• COM 4 (2E8h - IRQ3)
Enables, configures or disables
the infrared port.
Set the infrared port to disable in
order to increase the battery run
time.
When the FIR port is enabled two
additional configurable settings
appear: Uart 2 Mode and Fast IR
DMA Channel. Choose the
default settings for these fields or
refer to the IR device User’s
manual.
Parallel Port
• Auto*
• Disabled
• 378h,IRQ7 or IRQ5
• 278h,IRQ7 or IRQ5
• 3BCh,IRQ7 or IRQ5
Enables, configures or disables
the parallel port.
Set the parallel port to disable in
order to increase the battery run
time.
* Default value.