User`s guide

C
Troubleshooting
This chapter will try to anticipate potential problems that you may encounter in the day-
to-day use of your notebook. Included in this chapter is information that should help to
solve these problems for you. This section is organized into categories based on the
hardware.
The Power System
Question:
When I turn on the notebook, nothing happens. What’s the matter?
Answer:
1. If your system is running on battery power, the batteries are
may be completely drained. Attach the AC adapter and
recharge the batteries.
2. If you are running operating from the adapter, check to make
sure that it is plugged into a live power source. If the power
LED is on, it indicates that the power source is good and that
the adapter is functioning properly.
3. If there is a battery in the computer, turn off the system,
remove the battery, connect to AC power and then turn on the
computer. If there is still no response, consult your dealer for
an appraisal of the problem.
Question:
The computer keeps beeping at me. Have I done something
wrong?
Answer:
1. The computer is most likely trying to tell you that battery
power is low. Save your work, close your applications and
connect the AC Adapter.
2. If AC power is not available, turn off the notebook and replace
the battery.