User`s guide

System Software and Restoration
B-7
Installing Drivers
In order to restore your system back to its original Digital factory shipped standard, you
must install the HiNote VP 500 Series audio, video, track pad and network drivers (the
need to install the network driver depends upon your individual requirements). If you
have installed WinNT, you will also want to install the EPM (Enhanced Power
Management) driver located in the Driver/WinNT directory. Please refer to Chapter 5 in
the section labeled Installing PC Cards in WinNT 4.0, for information on EPM features.
These drivers are located on the Digital System CD. To install any of these drivers, please
refer to the following instructions:
1. Insert the CD into the CD-ROM drive.
2. Choose the Driver directory. Click on the Microsoft Operating system installed
on your system.
3. Click on the driver you wish to install, for example video.
4. Print the Video Printme.txt file. This file contains the detailed procedure for
installing the video driver. It is highly recommended that you print this
document and refer to it during driver installation.