User`s guide
Expansion and Option Devices
6-22
Figure 6-14: Securing the Notebook to the Port Replicator
4. Open the notebookâs LCD cover and resume normal operation.
Docking to a Port Replicator with NIC
If your Minidock Port Replicator is equipped with Network Interface Card (NIC), you will
need to load the network driver. To load the Minidock Port Replicator with NIC driver
please refer to the following:
1. Save all data, close any opened applications and shut down the notebook.
2. Dock the notebook to the Port Replicator and then turn on the power. Please
refer to figure 6-13, 6-14 and the corresponding instructions to ensure that the
notebook is properly docked to the Port Replicator.
3. You will be notified that new hardware has been found and asked if you wish to
install it. Click on the [Yes] button.
4. Follow the on-screen instructions to complete the driver installation. If you are
experiencing difficulty, request the assistance of your Network Administrator.