User`s guide

Expansion and Option Devices
6-12
1. Turn off the notebook, disconnect the AC cord and any connected peripherals
and remove the battery.
2. There are two Philips head screws located on the bottom of the notebook. They
secure the HDD into the unit and prevent it from being damaged from
vibrations. Remove these two screws. (Figure 6-8)
Figure 6-8: Removing the HDD (step 1)
3. Slide the HDD module plastic cover in the direction of the arrows shown in
figure 6-8.
4. Gently remove the HDD from its housing, by pulling on its handle in the
direction of the arrows shown in figure 6-9.
5. Store your HDD in a safe, dry place away from direct sunlight or heat.