User`s guide

Expansion and Option Devices
6-8
Loading a Disc into the Combination Module
To load a disk into the CD-ROM/FDD Combination module, please refer to figure 6-5,
figure 6-6 and the following instructions.
Figure 6-5: Ejecting the CD-ROM Tray
1. Press the eject button. The motorized tray ejects from the drive. (Figure 6-5)
2. Place the disc into the tray with the CD’s label facing up.
(Figure 6-6)
3. Push the tray, sliding it back into the drive.
____________________________Caution ____________________________
Do not insert any foreign objects into the disc tray. Do not force the tray to open or close
manually. When not in use, keep the tray closed to prevent dust or dirt from entering the
drive unit. The CD-ROM module uses 5¼” CDs; does not support 3” CDs.
________________________________________________________________