Technical data

Digital HiNote VP 500 Service Guide
2–11
Field
Action
Description
Save
Changes & Exit
<Enter>
Saves the current changes and exits the BIOS
Setup Program.
Discard
Changes & Exit
<Enter>
Discards the current changes and exits the BIOS
Setup Program.
Get Default Values
<Enter>
Loads the factory default values for each of the
fields in the BIOS Setup Program.
To keep default values and exit the BIOS Setup
Program, you must move the highlighted cell to
the Save Changes & Exit field and press the
<Enter> key.
Load Previous Values
<Enter>
Discards any changes made during the current
BIOS configuration session, and loads the prior
sessions values.
You cannot exit the BIOS through this field.
Saves Changes
<Enter>
Saves the changes made during the current BIOS
configuration session.
You cannot exit the BIOS through this field.