Technical data

2–8
Digital HiNote VP 500 Service Guide
Setting Admin. Password
To set the Admin. Password, move the highlighted cell to the Admin. Password field and
press <Enter>. The following dialogue box will appear:
Set Admin. Password
Enter new password:
[ ]
Confirm new password:
[ ]
1. Type in your password and press <Enter>. The password can be up to seven
alphanumeric characters. Symbols and other keys are ignored.
2. Type the password in a second time to confirm. Press <Enter> a second time. The
System Password is now set.
Changing Admin. Password
To change the Admin. Password, move the highlighted cell to the Admin. Password field and
press <Enter>. When the Admin. Password dialogue box appears, enter the new password.
Enter it a second time to confirm. The new password is now set.
Disabling Admin. Password
To disable the Admin. Password:
1. Open the Admin. Password dialogue box.
2. Continue to press the <space bar> until the cursor moves to the end of the Confirm new
password field.
3. Continue to press the <back space> key until the cursor returns to the beginning of the
Enter New Password field. Press <Enter>. This erases the password.
4. Complete the same steps in the New Password field to confirm the task. The old
password is erased and Admin. Password is disabled.