Technical data

2–6
Digital HiNote VP 500 Service Guide
Integrated Peripherals (Peripherals submenu)
Move the highlighted cell to this field and press <Enter> to open the submenu.
The following settings are available in the Integrated Peripherals Menu screen of the BIOS
Setup Program(Figure 2-4).
Figure 2-4 The BIOS Setup Integrated Peripherals Menu
Field
Settings
Description
Serial Port
Auto
Disabled
COM 1 (3F8h - IRQ4) *
COM 2 (2F8h - IRQ3)
COM 3 (3E8h - IRQ4)
COM 4 (2E8h - IRQ3)
Enables, configures or disables the
serial port.
Set the serial port to disable to
increase the battery run time.
Infrared
Auto
Disabled*
COM 1 (3F8h - IRQ4)
COM 2 (2F8h - IRQ3)
COM 3 (3E8h - IRQ4)
COM 4 (2E8h - IRQ3)
Enables, configures or disables the
infrared port.
Set the infrared port to disable to
increase the battery run time.
Parallel Mode
Disabled
Normal
Bi-Directional *
EPP Mode
(Extended Parallel Port)
ECP
(Extended Capabilities)
Disables the parallel port.
Parallel port is set for data-out mode
only.
Parallel port permits both data
output and data input.
Operates only with EPP aware
peripherals.
Operates only with ECP aware
peripherals. See your parallel device
user’s guide.
* Default value.