User`s guide

Chapter 6: Expansion and Option Devices
6-6 Digital HiNote VP 500 Series
1. Slide the locking button in the direction of the arrow shown in step 1 of Figure
6-3. This will unlock the Module Release latch.
2. Slide and hold the Module Release latch in the direction of the arrow shown in
step 2 of Figure 6-3.
3. Holding the Module Release latch in this position, slide the FDD module out of
the expansion bay. Please see step 3 in Figure 6-3.
4. Install the desired module. Move the locking button back to its original
position.