User`s guide

Chapter 5: PC Cards
Digital HiNote VP 500 Series 5-3
Figure 5-1: Inserting a PCMCIA Card
_____________________________Caution_____________________________
When inserting a Type III PC card, make sure the connector is
inserted in the lower socket. Before ejecting a PC Card, ensure that it
is not being accessed by the system. Memory card users must never
change a card’s write protect switch while the card is inserted into a
PC Card socket. To change the switch setting, (a) eject the card, (b)
change the switch setting, and (c) re-insert the card.
_________________________________________________________________
1. To remove a PC card simply push the respective eject button. The left eject
button will eject a Type I or Type II PC Card from the lower socket or a Type
III PC Card from the socket. The right eject button will eject a Type I or Type
II card from the upper socket.
2. Remove the card and store it properly.