User`s guide
Chapter 4: Peripheral Devices
Digital HiNote VP 500 Series 4-5
Parallel Port Data Transfers
When using Puma TranXit 2.0 to conduct parallel port data transfers under Windows for
Workgroups, you must enter the BIOS Setup Program and configure the Parallel Port to EPP
mode. For detailed information on changing the Parallel Port mode, please refer to Chapter 3,
Integrated Peripherals.
Connecting a Serial Mouse
The notebook has one Serial Port. Its address can be set through the BIOS Setup program (refer
to Chapter 3 for information on BIOS Setup). Connect a serial mouse as follows. (Figure 4-3)
Connect the mouse cable to the notebookâs serial port located on the rear of the notebook.
Tighten the thumb screws.
Figure 4-3: Connecting a Serial Mouse